01
CASE
CASE CX130-CX160 Series (13-16t) concrete pulverizer
360° hydraulic rotation · High crushing force | Compatible with 18–30 ton excavators | 2150 kN crushing force
✔ Reinforced concrete pulverization and demolition
✔ Demolition of chemical plants, steel mills, and steel-structure facilities
✔ Crushing concrete blocks for recycling and reuse
✔ Demolition and pulverization of high-strength concrete (18–30 ton class)
| Technical Specifications | |
|---|---|
| Item / Unit | JSRP180 Heavy-Duty Rotating Pulverizer |
| Applicable Tonnage (ton) | 18-30 |
| Weight (kg) | 1830 |
| Crushing Force (kN) | 2150 |
| Blade Length (mm) | 200 |
| Working Pressure (bar) | 200 |
| Flow Rate (lpm) | 150-250 |
| Type | 360° Rotating High-Torque Model |
Note: "-" in the table indicates that the data is not provided or is not applicable in the original figure.
Below are compatible excavator carrier models for our concrete pulverizer. Depending on model and application, this attachment may also be referred to as hydraulic pulverizer, demolition pulverizer or rotating hydraulic pulverizer.
CASE CX130-CX160 Series (13-16t) concrete pulverizer
CATERPILLAR 215, 311-315, E/M300 Series (12-18t) hydraulic pulverizer
DAEWOO S130-S180 Series (13-18t) demolition pulverizer
DOOSAN DX140/DX180 Series (14-18t) rotating hydraulic pulverizer
HELLA 130W (13t) concrete pulverizer
HITACHI EX/ZX120-160 & UH Series (12-16t) hydraulic pulverizer
Engineered for performance, built for durability, designed for efficiency
Blade forged from a single piece of Swedish Hardox® steel
42CrMo alloy steel pivot pin with integrated lubrication channels
Swiss-imported rotary motor delivering high torque and rapid rotation
Yokogawa piping and imported Hallite oil seals ensure short cycle times and long service life
Equipped with a differential acceleration valve, increasing no-load stroke speed by nearly 50%
Replaceable upper and lower wear-resistant tooth plates for low maintenance costs
Cylinder-integrated lock valve enhances safety by preventing dropped loads
